SaberVet Logo
SaberVet Canine Ehrlichia/ Anaplasma/ Babesiosis Antibody Combo Rapid Test
GMP Certified
A Specialized Brand by ITGen

SaberVet Canine Ehrlichia/ Anaplasma/ Babesiosis Antibody Combo Rapid Test

For qualitative detection of Ehrlichia, Anaplasma and Babesia canis antibodies in canine whole blood, serum or plasma. One buffered blood sample is loaded into three units for three independent results in 5–10 minutes, giving initial screening information for dogs with tick exposure or related signs.
Specimen
Whole blood, serum or plasma
Pack Size
10 tests per box (three targets per dog)
Reading Time
5–10 minutes
Technical Data

Product Parameters

Engineered for precision, built for reliability

Abbreviation & species
EHR/ANA/BC Ab; dog
Targets
Ehrlichia, Anaplasma and Babesia canis antibodies
Format
Three-target colloidal gold immunochromatographic combo cassette, qualitative
Specimen
Canine whole blood, serum or plasma, processed with the volumetric dropper and buffer provided
Sample volume
3 drops of mixture (about 90 μL) into each of the EHR, ANA and BC S wells
Pack size
10 tests per box (three targets per dog)
Reading time
5–10 minutes; results after 15 minutes are invalid
Storage & operation
Store sealed at 4–30°C away from light, do not freeze; test at 15–30°C

Clear Results, Confident Diagnosis

Eliminate diagnostic uncertainty with our advanced colloidal gold technology that delivers crystal-clear test lines and reliable results every time.

SaberVet Advantage

Clear SaberVet test results
  • Deep red, crystal-clear T-lines
  • Clean, interference-free background
  • GMP-controlled batch consistency
  • Confident, reliable diagnosis

Test Procedure

5 steps from the instructions for use

  1. Step 1: Prepare the buffer
    1

    Prepare the buffer

    Open one buffer tube provided and place it in the workstation.

  2. Step 2: Draw a measured sample
    2

    Draw a measured sample

    Use the volumetric dropper to draw blood and transfer the measured sample into the buffer tube.

  3. Step 3: Mix
    3

    Mix

    Close the cap tightly and shake gently to mix the sample with the buffer.

  4. Step 4: Load all three wells
    4

    Load all three wells

    Add 3 drops of the mixture (about 90 μL) to each of the EHR, ANA and BC wells.

  5. 5

    Time and read

    Start timing as soon as all three wells are loaded and read the three windows within 5–10 minutes. Results after 15 minutes are invalid.

Full step-by-step instructions
  1. 1. Prepare the buffer Open one buffer tube provided and place it in the workstation.
  2. 2. Draw a measured sample Squeeze the upper bulb of the volumetric dropper to draw blood so that a little sample enters the lower bulb and the tip contains no air bubbles. Squeeze the upper bulb again to transfer the sample in the tip into the buffer tube.
  3. 3. Mix Close the cap tightly and shake gently to mix the sample with the buffer.
  4. 4. Load all three wells Lay the cassette on a clean, level surface. Add the mixture vertically into the EHR, ANA and BC S wells, 3 drops (about 90 μL) per well.
  5. 5. Time and read Start timing as soon as all three wells are loaded and read the three windows within 5–10 minutes. Results after 15 minutes are invalid.

Reading the Results

Read within the time stated in the instructions for use

Check the C line in each of the three windows and record the EHR Ab, ANA Ab and BC Ab results separately.

Positive result

Positive

Both C and T lines appear. A faint colored T line within the reading time also counts as positive, indicating the corresponding antibody was detected.

Negative result

Negative

Only the C line appears: the corresponding antibody was not detected at the test's detection level. When clinical suspicion is high, further testing is needed.

Invalid result

Invalid

No C line appears: the result is invalid whether or not a T line appears.

Interpretation notes
  • Invalid: No C line appears: the result is invalid whether or not a T line appears. Check the sample and procedure and retest with a new cassette; record the other windows by their own lines.

Performance Data

Method comparison results stated in the instructions for use

Target Reference Method Positive AgreementNegative AgreementOverall Agreement
EHR Ab ELISA 98.50% 197/200 97.33% 146/150 98.00% 343/350
ANA Ab ELISA 98.13% 157/160 95.63% 153/160 96.88% 310/320
BC Ab ELISA 98.00% 49/50 96.67% 145/150 97.00% 194/200

Each target is evaluated separately against its reference method; the results are not combined into a single accuracy figure for the whole test.

Figures reflect the study samples and reference methods described in the instructions for use. Interpret individual results together with clinical findings.

Kit Contents

What is supplied in each box and what you need to prepare

SaberVet Canine Ehrlichia/ Anaplasma/ Babesiosis Antibody Combo Rapid Test kit components

Included in the kit

  • 10 triple-test cassettes
  • 10 volumetric droppers
  • 10 buffer tubes
  • Instructions for use
  • Workstation

Also required

Timer

Request Information

Submitting...