Sabervet Canine Distemper Virus/ Adenovirus II/ Influenza Virus Antigen Combo Rapid Test
Product Parameters
Engineered for precision, built for reliability
- Abbreviation & species
- CDV/CAV-II/CIV Ag; dog
- Targets
- Canine distemper virus, canine adenovirus type II and canine influenza virus antigens
- Method
- Colloidal gold immunochromatography; each of the three targets read visually and qualitatively
- Specimen
- Canine ocular, nasal or oral secretions
- Extraction
- Place the swab provided in the buffer tube and rotate more than 10 times
- Sample volume
- 3 drops of extract (about 90 μL) into each S well
- Pack size
- 10 tests per box (three targets per test)
- Reading time
- 5–10 minutes; results after 15 minutes are invalid
- Storage & operation
- Store sealed at 4–30°C away from light, do not freeze; test at 15–30°C
Clear Results, Confident Diagnosis
Eliminate diagnostic uncertainty with our advanced colloidal gold technology that delivers crystal-clear test lines and reliable results every time.
SaberVet Advantage
- Deep red, crystal-clear T-lines
- Clean, interference-free background
- GMP-controlled batch consistency
- Confident, reliable diagnosis
Test Procedure
5 steps from the instructions for use
-
1Prepare the buffer
Open the buffer tube provided and place it in the workstation.
-
2Collect secretions
Use the swab provided to collect ocular, nasal or oral secretions and note the sampling site.
-
3Extract the sample
Rotate the swab in the buffer more than 10 times, then close the dropper cap.
-
4Load all three wells
Add 3 drops of extract (about 90 μL) to each of the CDV, CAV-II and CIV wells.
-
5
Time and read
Start timing as soon as all three wells are loaded and read each result within 5–10 minutes. Results after 15 minutes are invalid.
Full step-by-step instructions
- 1. Prepare the buffer Open the buffer tube provided and place it in the workstation.
- 2. Collect secretions Use the swab provided to collect ocular, nasal or oral secretions and note the sampling site.
- 3. Extract the sample Place the swab in the buffer tube and rotate more than 10 times to release the sample; remove the swab and close the tube with the dropper cap.
- 4. Load all three wells Lay the cassette on a clean, level surface. Add 3 drops of extract (about 90 μL) vertically into each of the CDV, CAV-II and CIV S wells.
- 5. Time and read Start timing as soon as all three wells are loaded and read each result within 5–10 minutes. Results after 15 minutes are invalid.
Reading the Results
Read within the time stated in the instructions for use
Check the C line window by window and record CDV Ag, CAV-II Ag and CIV Ag separately, not as one general respiratory positive or negative.

Positive
Both C and T lines appear; a faint colored T line within the reading time also counts as positive, meaning the corresponding antigen reached the detection level.

Negative
Only the C line appears.

Invalid
No C line appears: the result cannot be read, with or without a T line.
Interpretation notes
- Negative: Only the C line appears. The corresponding antigen was not detected at the test's detection level; early infection, low antigen load or sampling effects cannot be fully excluded.
- Invalid: No C line appears: the result cannot be read, with or without a T line. Check the drop volume of each well and the sample processing, then retest with a new cassette.
Kit Contents
What is supplied in each box and what you need to prepare

Included in the kit
- Triple-test cassettes
- Sampling swabs
- Buffer tubes
- Instructions for use
- Workstation
Also required
Timer